7-12
14.Select Interface
<Screen 54>
1Press “Next” or “Previous” and let
the scanner display Screen 54.
NOTICE
The screen 54 will appear oniy when the scanner has proper interface boards or option boards in the
third party slot.
2At Screen 54, press or to select the
interface type. Press if you want to
change the setting.
NOTICES
1. Normally, this setting does not have to be changed.
2. When an appropriate board is installed in the third party slot of the scanner, the scanner
automatically turns off the SCSI interface, activating the board in the third party slot. Screen 54
can be used to forcibly change the selected interface. The selected interface is then forcibly
changed.
3. The SCSI interface and the board installed in the third party slot cannot be used at the same time.
4. The default is Auto.
3Press to return.