Fujitsu MAN3367, MAN3735, MAN3184 specifications Parameter Data Formats

3.1.19.1	PERSISTENT RESERVE OUT service actions	3-66
3.1.19.2	PERSISTENT RESERVE OUT parameter list	3-67
3.1.20	REPORT LUNS (A0)	3-69
3.1.21	REPORT DEVICE IDENTIFIER (A3)	3-71
3.1.22	SET DEVICE IDENTIFIER (A4)	3-73
3.2	Data Access Commands	3-75
3.2.1	READ (08)	3-75
3.2.2	READ EXTENDED (28)	3-76
3.2.3	WRITE (0A)	3-77
3.2.4	WRITE EXTENDED (2A)	3-78
3.2.5	WRITE AND VERIFY (2E)	3-79
3.2.6	VERIFY (2F)	3-80
3.2.7	SEEK (0B)	3-81
3.2.8	SEEK EXTENDED (2B)	3-82
3.2.9	SET LIMITS (33) (Not Supported)	3-83
3.2.10	SYNCHRONIZE CACHE (35)	3-86
3.3	Format Commands	3-87
3.3.1	FORMAT UNIT (04)	3-87
3.3.2	REASSIGN BLOCKS (07)	3-98
3.3.3	READ DEFECT DATA (37)	3-102
3.4	Maintenance, Diagnostic Commands	3-107
3.4.1	SEND DIAGNOSTIC (1D)	3-107
3.4.2	RECEIVE DIAGNOSTIC RESULTS (1C)	3-114
3.4.3	WRITE BUFFER (3B)	3-118
3.4.4	READ BUFFER (3C)	3-124
3.4.5	READ LONG (3E)	3-129
3.4.6	WRITE LONG (3F)	3-131
3.4.7	WRITE SAME (41)	3-133
CHAPTER 4 PARAMETER DATA FORMATS		4-1
4.1	Mode Parameters	4-1
4.1.1	Read/Write error recovery parameters (page code = 1)	4-1
4.1.2	Disconnect/reconnect parameters (page code = 2)	4-11
4.1.3	Format parameter (page code = 3)	4-15
4.1.4	Drive parameter (page code = 4)	4-19
4.1.5	Verify error recovery parameters (page code = 7)	4-21
4.1.6	Caching parameters (page code = 8)	4-23

C141-E124-01EN xi