Fujitsu MAN3184, MAN3367, MAN3735 SERIES DISK DRIVES specifications

Page Code	Description	Parameter Pointer
00	Supported Log Pages	Ignored
01	Buffer Overrun / Underrun Page	Supported
02	Write Error Counter Page	Supported
03	Read Error Counter Page	Supported
05	Verify Error Counter Page	Supported
06	Non-medium Error Page	Should be zero
0D	Temperature Page	Supported
0E	Start-stop Cycle Counter Page	Supported
0F	Application Client Log Page	Supported
10	Self-Test Result Log Page	Supported
2F	SMART Status Page	Ignored
38	SMART Data Page	Ignored

The "Parameter Pointer" field allows the application client to request parameter data beginning from s specific parameter code to the maximum allocation length or the maximum parameter code supported by the target, whichever is less. If the value of the "Parameter Pointer" field is larger than the largest available parameter code known to the device server for the specified page, the device server terminates the command with CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in CDB [=24-00]).

The "Parameter List Length" field in the CDB specifies the total number of bytes of log parameter which can be transferred to the INIT by this command. The IDD transfers the number of bytes of all log parameters specified in the "Page Code" field or the portion of log parameters with the length specified in the "Parameter List Length" field, whichever is smaller. When zero is specified in the "Parameter List Length" field, this command is terminated without anything being transferred.

C141-E124-01EN 3 - 57