Fujitsu MAN3184, MAN3367, MAN3735 SERIES DISK DRIVES specifications Sense

			Table 5.3	Sense data error classification	(3 of 4)
K*	C*	Q*		Outline of Error		L*	Recovery Method
							(See Table 4.4.)
6	2A	01	Mode parameters changed			None	21
			The MODE SELECT parameters were changed by
			another INIT.
6	2F	00	Commands cleared by another INIT			None	25
			Commands were cleared by another INIT.
6	3F	01	Microcode has been changed			None	27
		02	Changed operation definition
6	5B	01	Log exception (Threshold condition met)			None	26
			The current cumulative value exceeded the current
			threshold value.
		02	Log count at maximum
			The current cumulative value reached the maximum
			value.
6	5C	01	Spindle synchronized			None	22
			Rotational synchronization was completed.
6	5C	02	Spindle not synchronized			None	23
			Rotational synchronization deviated.
7	27	00	Write protected			None	15
			Access to a read protected or write protected.
7	2C	00	Command sequence error			None	2
			The SET LIMITS command was issued 2 times
			within a group of commands linked in a series.
B	03	xx	Peripheral device write fault			Need	12
	11	xx	Unrecovered read error
	13	xx	Sync byte not found for data field
	14	xx	Record not found
	15	xx	Mechanical positioning error
B	43	00	Message error			Need	6
	45	80	Select/Reselect failure
	47	00	SCSI parity error
	48	00	INITIATOR DETECTED ERROR message received
	49	00	Invalid message error
			An unrecoverable SCSI related error occurred in
			the command execution sequence.
B	4E	00	Overlapped commands attempted			None	2
			Before execution of a command was completed, a
			new command was issued by the same INIT.
	4D	nn	Tagged overlapped commands
* K:	Sense	Key	C: Sense Code

Q: Sub-sense code L: Logging Necessary? (shown in Section 5.2.3)

5 - 18 C141-E124-01EN