Fujitsu MAN3184, MAN3367, MAN3735 SERIES DISK DRIVES specifications Ackbreqb ACKB/REQB

Bque	CmdQue	Description
0	0	No command queuing of any kink supported

01 Command queuing with all types of task tags supported

10 Basic task set model supported

11 Illegal combination of BQue and CmdQue bits

-VS (Vendor specific):

Not defined	[0]
ξ SCSI-2 mode
[Byte 3]
- AENC (Asynchronous event notification capability):
Asynchronous condition notify function	[0]
- TrmIOP (Terminate I/O process):
TERMINATE I/O PROCESS message	[0]
[Byte 6]
- DualP (Dual port):
Dual port function	[0]
- Port:
Connection port, '0'= connect to port A	[0]
'1'= connect to port B
- ACKBREQB (ACKB/REQB):
Use the ACKB and REQB signals with the B cable or the Q cable	[0]
- Addr32 (Wide SCSI address 32):
32 bit SCSI addressing	[0]
- Addr16 (Wide SCSI address 16):
16 bit SCSI addressing	[0/1]
[Byte 7]
- RelAdr (Relative addressing):
Relative logical block addressing	[0]
- WBus32 (32-bit wide data transfer):
Data transfer on a 4-byte bus	[0]
- WBus16 (16-bit wide data transfer):
Data transfer on a 2-byte bus	[0/1]
- Sync (Scychronous data transfer
Data transfer in the synchronous mode	[1]
- Linked (Linked command):
Command link function	[1]
- TTD (Target transfer disable):
Target transfer disable message	[1]
- CmdQue (Command queuing):
Tagged command queuing feature	[1]
- SftRe (Soft Reset):
Soft reset condition	[0]

h.Vendor ID field

This field indicates the name of the product's supplier in left-justified ASCII code, and always indicates FUJITSU. The unused right end is space for the ASCII code.

C141-E124-01EN 3 - 7