C141-E124-01EN 4 - 3
Error recovery parameters defined in this page descriptor are applicable for the following
commands, except in cases where it is specifically pointed out.
xREAD xWRITE
xREAD EXTENDED xWRITE AND VERIFY (Write operation)
xREAD LONG xW RITE EXTENDED
xSEND DIAGNOSTIC (Write/read test) xWRITE LONG
a. AWRE (automatic write reallocation enabled)
"1" : An "automatic alternate block allocation processing" operation is specified during
execution of a write operation.
"0" : An "automatic alternate block allocation processing" operation is prohibited during
execution of a write operation.
Automatic alternate block allocation processing is explained in Section 5.3.2.
b. ARRE (automatic read reallocation enable)
"1" : An "automatic alternate block allocation processing" operation is specified during
execution of a read operation.
"0" : An "automatic alternate block allocation processing" operation is prohibited during
execution of a read operation.
Automatic alternate block allocation processing is explained in Section 5.3.2.
c. TB (transfer block)
"1" : Data blocks which contain errors that are impossible to correct are transferred to the
INIT during a read operation.