Fujitsu MB2147-01 manual General Specifications, 3-1 General specifications

1.3 General Specifications

1.3General Specifications

This section covers the general specifications of the emulator.

■General specifications

CAUTION

Caution	Use the product according to its specifications. Doing so may result in
	device problems.

Table 1.3-1"General specifications" lists the general specifications of the emulator.

The following names used in this manual have the following definitions:

•Emulator: Emulator unit + adapter board

•Emulator system: Emulator unit + adapter board + probe

Table 1.3-1 General specifications

Item		Specification
Name	F2MC-16L/16LX Emulator
Model name	MB2147-01
Emulator power supply	Power supply input	+16 V 2.5 A (supplied using a special AC adapter)
	Emulator interface power	+3.3 V or +5.0 V (supplied from the emulator)
Evaluation MCU power	supply output
supply
	User system power supply	+1.8 V to +5.5 V(*1) 10 mA or less(*2) (Dual source power
	input	supply supported: Supplied from the user system)
Operating frequency	High-speed I/F	8 KHz to 33 MHz(*3)
	Conventional interface	8 KHz to 20 MHz(*3)
Temperature	+5 to +35 degrees Celsius
Humidity	20 to 80% (No condensation)
External dimensions	148(W) x 210(D) mm x 44(H) (excluding protruding sections and rubber feet)
Weight	700 g

*1: The upper and lower voltage limits depend on the evaluation MCU used. For more information, contact the Fujitsu Sales Dept. or Support Dept.

*2: The current consumption of the evaluation MCU is excluded.

*3: The upper and lower frequency limits depend on the evaluation MCU used. The upper and lower frequency limits may depend on the operating voltage, even if the same evaluation MCU is used. For more information, contact the Fujitsu Sales Dept. or Support Dept.

5