CHAPTER 2 CONNECTING THE EMULATOR
■Connecting (using flat cables and a probe header) to the user system
CAUTION
Make sure that power to the product is turned off and the power plug is
Prohibition disconnected from outlets before connecting or disconnecting cables. Doing so may result in device problems or electric shock.
Do not grasp the cable when unplugging the power plug and cable. Always grasp the power plug or connector itself. Pulling the cable may expose conductors or sever wires in it, possibly resulting in device problems, fire, or electric shock.
With a probe header compatible with the package of the
For more information on how to connect the connector of the probe header, see the operation manual of the probe header used.
Figure
Flat cables |
|
|
|
|
|
|
| Eject locks |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PROBE CN1 B1 PROBE CN B2
Probe header
User system
To connect a flat cable, push its connector into the connector of the probe header until the eject locks on both sides of the flat cable connector lock.
To disconnect a flat cable, pinch the eject locks on both sides of the flat cable connector until the flat cable unlocks, and pull out the connector.
26
