3.7 Using the Setting Switches
■Using switches to change parameter values
The following procedure applies to using the setting switches to change parameter values:
1.Display parameters on the LCD. Use the Up or Down key to move the blinking cursor ( 
) to the column (position) of the value to be changed.
2.Click the ENTER key to set the column (position) of the value to be changed. The cursor changes its form to "_" (underscore).
3.Use the Up or Down key to increment or decrement the defined value (numeric value) to the desired value (numeric value).
4.Click the ENTER key to confirm the new value (numeric value) to be set.
5.Change all values (numeric values) of the parameters to be modified. After that, use the Up or Down key to move the cursor to the location immediately to the right of "[OK]," and click the ENTER key to end the parameter value change operation.
■Using switches for selection or confirmation
The following procedure applies to using the setting switches for selection and confirmation:
•For selection
Use the Up or Down key to move the cursor to the location immediately to the right of an item or command (e.g., [Yes] or [No]) to select the item or command, and click the ENTER key.
•For confirmation
Move the cursor to the location immediately to the right of [OK], and click the ENTER key.
45
