Replacing built-in Battery Unit

Prior to replacing the built-in battery pack, it is required to save the programs and data to the hard disk, etc. This section describes how to replace the built-in battery pack.

WARNING

Electric shock

Before replacing the built-in battery pack, be sure to switch the PC power off and disconnect the AC adapter. Do not touch the connectors on the PC and the battery pack.

1Switch the PC power off and disconnect the AC adapter.

2Close the LCD display and turn the PC over.

3Release the lock.

To release the lock, slide the release button (1) on the bottom surface and the built-in battery pack lock (2) at the same time.

1

Built-in battery pack lock

Release button

2

32

Page 42
Image 42
Fujitsu S4546, S4545 manual Replacing built-in Battery Unit, Electric shock