SECTION 2

7 Using Internal Data / Fax Modem

Connection

Depending on the model, the PC has an internal data fax modem that corresponds to V.90, which realizes comfortable and error-free communications in accordance with MNP Class 4/5 and ITU-T V.42/V.42bis.

WARNING

ELECTRIC SHOCK

To connect a modular cable, be sure to switch the PC power off and disconnect the AC adapter beforehand. Otherwise you may undergo an electric shock.

ELECTRIC SHOCK

If lightning occurs in the neighborhood, switch the PC power off and disconnect the

AC adapter and the modular cable. Continuing use may cause the PC to be damaged and a fire to break out.

CAUTION

ELECTRIC SHOCK

• Do not put your fingers in the modular connector. It may cause an electric shock.

1.Switch the PC power off and disconnect the AC adapter.

2.Connect the modular connector on the PC and the telephone line via a modular cable.

Critical Points

￿To remove the plug from the modular connector, draw it while holding

down the lug. Otherwise damages may occur.

￿ It is recommended to use the AC adapter when using the modem because the power consumption increases.

52

Page 62
Image 62
Fujitsu S4546, S4545 manual Using Internal Data / Fax Modem, Connection