1Switch the PC power off and disconnect the AC adapter.

2Close the LCD display and turn the PC over.

3Remove the two screws and remove the extended RAM module slot cover. Remove the extended RAM module slot cover that is mounted on the PC rear surface.

Slot cover

4Remove the memory.

Press outwards the two tabs that hold the memory and take the memory out.

Tab

Memory

5Install the new memory.

Fit the notch in the memory to the lug on the connector and firmly insert the memory in a diagonal direction until you hear a click.

6Install the extended RAM module slot cover.

Install the cover that was removed in Step 3.

Slot cover

Notch

IMPORTANT NOTE

Incorrect installation of a memory may cause a message “Extended memory error” or the screen will display nothing after switching the power on. In this case switch the PC power off using the MAIN switch and re-install the memory.

44

Page 54
Image 54
Fujitsu S4546, S4545 manual Remove the memory, Install the new memory, Install the extended RAM module slot cover