Fujitsu T5140, T5240 Installing the SPARC Enterprise T5140 and T5240 Servers

15
CHAPTER 2
Installing the SPARC Enterprise
T5140 and T5240 Servers
This chapter provides instructions for installing the servers into an equipment rack.
Note – If your rackmount kit came with its own instructions, use the instructions in
your rackmount kit instead of the instructions in this chapter.After performing the
server installation, proceed to Chapter3 for first-time power on.
This chapter contains the following sections:
■“Installing the Servers in a Rack” on page 15
■“Installing the Cable Management Arm for Both Servers” on page 24
■“Connecting the Server Cables for Both Servers” on page 31
■“Managing Cables With the CMA” on page 34
■“Dismounting the Servers” on page 35
Note – References to left and right are from your viewpoint as you face either the
front or rear of the equipment.
Installing the Servers in a Rack
Note – Ensure that you have all of the parts in the rackmount kit before you begin
the installation of the server.