40 SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
FIGURE3-1 Server Connections
4. (Optional) Connect an Ethernet cable between the server’s Net MGT port
(FIGURE3-1) and the network to which future connections to the SP and host
will be made.
After the initial configuration of the system using the SP SER MGT port,
communication with the SP and host is usually performed through this Ethernet
interface.
5. Connect an Ethernet cable between one of the server’s NET ports (FIGURE 3-1)
and the network to which the server will communicate.
6. Plug the power cords into the power supplies and into a power source.
SER MGT
RJ-45
NET MGT
RJ-45
NET 0 to NET 3
RJ-45
SP to Ethernet
Host to Ethernet
RJ-45 to DB-25
crossover
adapter
RJ-45 to DB-9
crossover
adapter
Terminal
device