Chapter 3 Powering On the System 57
▼To Reset the System
●If it is necessary to reset the system, use the shutdown -g0 -i6 -y
command.
It is not necessary to power the system off and on to simply reset the system.
▼To Power Cycle the System
If a simple reset does not clear a system problem, you can power the system off and
on with this procedure.
1. Shutdown the Solaris OS.
At the Solaris OS prompt, type the shutdown -g0 -i0 -y command. Then
type hwhen prompted to halt the Solaris OS and to return to the ok prompt.
2. Switchfrom the system console prompt to the service processor console
prompt by issuing the console escape sequence (by default, #.
(Pound-Period)).
3. Usingthe ILOM CLI, type the stop /SYS command to perform a graceful
shutdown of the system.
#shutdown -g0 -i6 -y
#shutdown -g0 -i0 -y
# svc.startd: The system is coming down. Please wait.
svc.startd: 91 system services are now being stopped.
Jun 12 19:46:57 wgs40-58 syslogd: going down on signal 15
svc.startd: The system is down.
syncing file systems... done
Program terminated
r)eboot, o)k prompt, h)alt?
ok #.
->
-> stop /SYS
Are you sure you want to stop /SYS (y/n)? y
Stopping /SYS
->