58 SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
Note – Toperform an immediate and ungraceful shutdown, use the stop -force
-script /SYS or stop -script /SYS commands. These commands stop
everything immediately,ensure that all data is saved before entering these
commands.
4. Type the start /SYS command.
Note – Toforce a power-on sequence, use the start -script /SYS command.
5. Reconnect to the system console with the start /SP/consolecommand.
The systems displays various messages, followed by the ok prompt.
VerifyingSystem Functionality
After powering on the system for the first time, you can use the Sun ValidationTest
Suite (SunVTS™) software to verify the functionality and performance of any
installed components, as well as its network connections. Refer to the SunVTS
documentation at http://www.sun.com/documentation for more information.
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
->
-> start /SP/console
Are you sure you want to start /SP/console (y/n)? y
Serial console started. To stop, type #.