Fujitsu XG0224 manual Two ways below are possible for putting on rack mounting brackets

XG0224 Hardware Guide Chapter 2 Installation

2.Put rack mounting brackets on the switch using M3 Countersunk Screws (Qty 8).

Two ways below are possible for putting on rack mounting brackets.

[STANDARD] [OFFSET]

	M3 Countersunk	M3 Countersunk
	Screws
		Screws
Rack Mounting Brackets		Rack Mounting Brackets

Precautions

When putting on rack mounting brackets, make sure to use special screws included in the 19” rack brackets set. If other screws are used, it may break. Also, make sure to use cross slot screwdriver corresponding to the screw thread.

3.Fix the switch that rack mounting brackets are put at the procedure 2.

Installation screw

Precautions

Pre-occupied devices in the upper and/or lower row of the rack may interfere with the power cable of the switch from being properly installed.In that case, plug the power cable to the switch before install it in the rack.

32 Installation