Manuals / Fujitsu / Computer Equipment / Switch

Fujitsu XG0224 manual Turn on the Power, Power will turn on

Models: XG0224

1 47

Page 42

XG0224 Hardware Guide	Chapter 2 Installation

Turn on the Power

Caution

•Please use the power cable included in this product. Also, please do NOT use this power cable on other products.

•If the power outlet does not match with the power cable plug, please use the change plug adapter.

As a safety measure to prevent electrical shocks, please make sure to connect the ground wire of the change plug.

Precautions

Please set the switch (product) to a place near the electrical outlet which the power cable will be connected and secure a space for the power cable to be pulled off easily.

1.Connect the power cable to the electrical outlet.

2.Plug in the power cable to the power connecter of switch power inlet side.

Power will turn on.

3.The PSU lamp on the front panel of the device lights up in green.

PSU

42	Connecting to a Setup PC

Page 42

Image 42

Fujitsu XG0224 manual Turn on the Power, Power will turn on

Contents

TA41001-6348 XG0224Hardware Guide Preface 1. Use and Copyright of the Software LICENSE AGREEMENT4. Scope of Warranty 2. Transfer5. High Safety Required Use FUJITSU LIMITEDChapter ContentsInstallation Getting StartedTime Setting Connecting to a Setup PCContents Set up IP addressOrganization and Usage of This Manual About the SymbolsHint Precautions About This ManualTrademark Notification in This Manual Abbreviated Product NamesHow the Manuals for This Device Are Organized Manual NameDescription Safety Precautions About Warning DescriptionsWarnings Indicates that improper use can cause light or moderate injury CautionsCleaning Notes on MaintenancePrecautions for Use Eliminating Static Electricity from Twisted Pair Cables GroundingHigh Safety Required Applications SafetyHigh safety Electromagnetic Compatibility USALaser Safety Notes on Rack Mounting and Connecting a PowerstripAbout Fujitsus Green Products Notes on Use 1.1.2 Port Side 1.1.3 Power Inlet Side 1.1.4 Top Surface 1.2 Options Chapter Getting Started1.1 Items in the Package, Descriptions and Functions 1.1.1 Parts List 1.2.1 SFP Modules 1.2.2 SFP+ Modules 1.2.3 Compact Flash1.1.1 Parts List 1.1 Items in the Package, Descriptions and Functions1.1.2 Port Side PrecautionsLED Details State LED Functions / BehaviorsLED Name Status1.1.3 Power Inlet Side 000000000000XG0224 Hardware Guide 1.1.4 Top SurfaceWarning Label Chapter 1 Getting Started1.2.2 SFP+ Modules 1.2 Options1.2.1 SFP Modules 1.2.3 Compact FlashLED Display Content 1.2.4 Expansion CardSFP+ Expansion Card LED Name CX4 Expansion CardLED Display Content StateChapter Installation Temperature and Humidity Requirements 2.1 Requirements for Installation Environment2.1.1 Installation Requirements Power RequirementsCheck Item Installation ConditionCheck List Check ResultEnsuring the Space for Installation Maintenance of the Switch 2.1.2 Space Requirements2.2 Installation 2.2.1 Installation of the SwitchInstallation on 19” Rack Two ways below are possible for putting on rack mounting brackets 2.2.2 Installation of Extension Card Installation of SFP+ Extension Card / CX4 Extension CardRemoving SFP+ Extension Card / CX4 Extension Card Cleaning of SFP Module / SFP+ Module 2.3 Connecting the Equipment2.3.2 Cleaning SFP Module / SFP+ Module / Optical Connector 2.3.1 Discharging Twisted Pair CableCleaning of Optical Connector Removal of Micro DustConnecting Twisted Pair Cable optical cableTwisted pair cable Connecting SFP Module Connecting SFP+ Module 2.3.4 Installing Compact Flash Card Connecting CX4 CableDo NOT unplug during access. It may result in crashing setting data 2.4 Connecting to a Setup PC Necessary Hardware / SoftwareConnect RS232C Cable Turn on the Power Power will turn onPrepare a Setup PC Log on using the terminal softwareSwitch to Configuration mode 2.5 Time Settingz Command When setting time zone to be “-0500“2.6 Set up IP address z CommandIndex Issued by XG0224 Hardware GuideIssued on TA41001-6348