Manuals / Fujitsu / Computer Equipment / Switch

Fujitsu XG0224 manual Removing SFP+ Extension Card / CX4 Extension Card

Models: XG0224

1 47

Page 34

XG0224 Hardware Guide	Chapter 2 Installation

Removing SFP+ Extension Card / CX4 Extension Card

1.Turn off the power of the switch.

Caution

If the extension card is removed when the power is on, the Check LED will light up and the switch will go into trouble state.

2.Loosen the screws on the extension slot and remove the extension card.

3.Put the cover panel on the extension slot, and fix it on the switch with the screws.

Precautions

When the switch is operated without the extension card, make sure to put the cover panel on the switch.

34	Installation

Page 34

Image 34

Fujitsu XG0224 manual Removing SFP+ Extension Card / CX4 Extension Card

Contents

XG0224 TA41001-6348Hardware Guide Preface 1. Use and Copyright of the Software LICENSE AGREEMENT4. Scope of Warranty 2. Transfer5. High Safety Required Use FUJITSU LIMITEDChapter ContentsInstallation Getting StartedTime Setting Connecting to a Setup PCContents Set up IP addressOrganization and Usage of This Manual About the SymbolsHint Precautions About This ManualTrademark Notification in This Manual Abbreviated Product NamesManual Name How the Manuals for This Device Are OrganizedDescription Safety Precautions About Warning DescriptionsWarnings Indicates that improper use can cause light or moderate injury CautionsCleaning Notes on MaintenancePrecautions for Use Eliminating Static Electricity from Twisted Pair Cables GroundingHigh Safety Required Applications SafetyHigh safety Electromagnetic Compatibility USANotes on Rack Mounting and Connecting a Powerstrip Laser SafetyAbout Fujitsus Green Products Notes on Use 1.1.2 Port Side 1.1.3 Power Inlet Side 1.1.4 Top Surface 1.2 Options Chapter Getting Started1.1 Items in the Package, Descriptions and Functions 1.1.1 Parts List 1.2.1 SFP Modules 1.2.2 SFP+ Modules 1.2.3 Compact Flash1.1.1 Parts List 1.1 Items in the Package, Descriptions and Functions1.1.2 Port Side PrecautionsLED Details State LED Functions / BehaviorsLED Name Status1.1.3 Power Inlet Side 000000000000XG0224 Hardware Guide 1.1.4 Top SurfaceWarning Label Chapter 1 Getting Started1.2.2 SFP+ Modules 1.2 Options1.2.1 SFP Modules 1.2.3 Compact Flash1.2.4 Expansion Card LED Display ContentSFP+ Expansion Card LED Name CX4 Expansion CardLED Display Content StateChapter Installation Temperature and Humidity Requirements 2.1 Requirements for Installation Environment2.1.1 Installation Requirements Power RequirementsCheck Item Installation ConditionCheck List Check ResultEnsuring the Space for Installation Maintenance of the Switch 2.1.2 Space Requirements2.2.1 Installation of the Switch 2.2 InstallationInstallation on 19” Rack Two ways below are possible for putting on rack mounting brackets 2.2.2 Installation of Extension Card Installation of SFP+ Extension Card / CX4 Extension CardRemoving SFP+ Extension Card / CX4 Extension Card Cleaning of SFP Module / SFP+ Module 2.3 Connecting the Equipment2.3.2 Cleaning SFP Module / SFP+ Module / Optical Connector 2.3.1 Discharging Twisted Pair CableCleaning of Optical Connector Removal of Micro Dustoptical cable Connecting Twisted Pair CableTwisted pair cable Connecting SFP Module Connecting SFP+ Module Connecting CX4 Cable 2.3.4 Installing Compact Flash CardDo NOT unplug during access. It may result in crashing setting data Necessary Hardware / Software 2.4 Connecting to a Setup PCConnect RS232C Cable Turn on the Power Power will turn onPrepare a Setup PC Log on using the terminal softwareSwitch to Configuration mode 2.5 Time Settingz Command When setting time zone to be “-0500“2.6 Set up IP address z CommandIndex Issued by XG0224 Hardware GuideIssued on TA41001-6348