![Connecting SFP+ Module](/images/new-backgrounds/105120/10512077x1.webp)
XG0224 Hardware Guide | Chapter 2 Installation |
|
|
Connecting SFP+ Module
Firmly install SFP+ module to SFP+ slot and lock module to the switch.
SFP+ module
Caution
Make sure to turn off the power when inserting and pulling out the SFP+ module.
Precautions
•Safely keep a guard cap of SFP+ module.
•Make sure to clean the end face of SFP+ module / optical cable before connecting optical connector because the end face may possibly be contaminated. Please refer to "2.3.2 Cleaning SFP Module / SFP+ Module / Optical Connector" (pg.35) for cleaning.
•Do not directly touch the contact part of SFP+ module by hands. Use wristbands when touching SFP+ module.
•Connecting part to the optical cable of SFP+ module is the laser opening.
Insert SFP+ module to the SFP+ slot with a lever locked, and lock the module and the switch. Connect optical cable (connector shape: DLC) after inserting SFP+ module to the SFP+ slot.
When removing SFP+ module, unlock the lever, module and the switch, and remove the module after unplug the optical fiber.
Lever
Precautions
Cable length will be as below based on the specification of the optical fiber cable
Type | Core/Cladding Diameter | Minimum Transimission Band | Cable Length (m) |
MMF | 62.5/125∝m | 160MHz/km | 26 |
|
|
|
|
|
| 200MHz/km | 33 |
| 50/125∝m | 400MHz/km | 66 |
|
|
|
|
|
| 500MHz/km | 82 |
|
| 2000MHz/km | 300 |
|
|
|
|
Use the appropriate cable according to the installation place.
39 | Connecting the Equipment |