Fujitsu XG0224 manual Installing Compact Flash Card, Connecting CX4 Cable

XG0224 Hardware Guide Chapter 2 Installation

Connecting CX4 Cable

Firmly install CX4 cable to CX4 expansion card port and lock the cable.

CX4 Cable

Precautions

•Make sure to firmly insert the cable straight from behind.

•When bending the cable, make sure that the diameter of the bent cable does not become somaller than 10cm.

•When pulling out the cable, make sure to pull the pull tab of the cable connector. The cable may disconnect if you pull the cable itself.

2.3.4Installing Compact Flash Card

Compact Flash Card shall be installed in the power inlet side of the switch.

Caution

•Do NOT unplug during access. It may result in crashing setting data.

•Please refer to the following instructions, for installing the compact flash card. When installed in a wrong direction, it may cause trouble to the switch.

Precautions

Make sure to use the specified product (SANDISK SDCFJ-256-388 256 MB).

1.Firmly insert and lock the Compact Flash Card to Compact Flash Card Slot on the power inlet side of the switch.

Precautions

Please be careful of the direction when inserting Compact Flash Card.

40 Connecting the Equipment