Manuals / Fujitsu / Computer Equipment / Switch

Fujitsu XG0224 Connecting to a Setup PC, Necessary Hardware / Software, Connect RS232C Cable

Models: XG0224

1 47

Page 41

XG0224 Hardware Guide	Chapter 2 Installation

2.4Connecting to a Setup PC

This is to connect a set up PC to the console port of the switch using RS232C cable.

Necessary Hardware / Software

Please prepare the hardware & software specified below to connect to the switch.

•Personal Computer

1 unit of personal computer for setting up configuration is required.

•RS232C cable(Cross, D-SUB9 pin)

RS232C cable is required to connect the set up PC to the switch.

Also, please use the console cable which is included in this product for connection.

Reference User’s Guide "1.1.5 Console Port Specifications" (pg.28)

•Communication Software Terminal software is required.

Connect RS232C Cable

1.Confirm power of both the PC and the switch are off.

2.Connect the RS232C cable and the console cable which is included in this product, and firmly fix them with the screw.

3.Plug in the RJ45 plug of the console cable to the console port of the switch.

41	Connecting to a Setup PC

Page 41

Image 41

Fujitsu XG0224 manual Connecting to a Setup PC, Necessary Hardware / Software, Connect RS232C Cable

Contents

Hardware Guide TA41001-6348XG0224 Preface 4. Scope of Warranty LICENSE AGREEMENT1. Use and Copyright of the Software 2. TransferFUJITSU LIMITED 5. High Safety Required UseInstallation ContentsChapter Getting StartedContents Connecting to a Setup PCTime Setting Set up IP addressHint Precautions About the SymbolsOrganization and Usage of This Manual About This ManualAbbreviated Product Names Trademark Notification in This ManualDescription How the Manuals for This Device Are OrganizedManual Name About Warning Descriptions Safety PrecautionsWarnings Cautions Indicates that improper use can cause light or moderate injuryPrecautions for Use Notes on MaintenanceCleaning Eliminating Static Electricity from Twisted Pair Cables GroundingHigh safety SafetyHigh Safety Required Applications Electromagnetic Compatibility USAAbout Fujitsus Green Products Laser SafetyNotes on Rack Mounting and Connecting a Powerstrip Notes on Use 1.1 Items in the Package, Descriptions and Functions 1.1.1 Parts List Chapter Getting Started1.1.2 Port Side 1.1.3 Power Inlet Side 1.1.4 Top Surface 1.2 Options 1.2.1 SFP Modules 1.2.2 SFP+ Modules 1.2.3 Compact Flash1.1 Items in the Package, Descriptions and Functions 1.1.1 Parts ListPrecautions 1.1.2 Port SideLED Details LED Name LED Functions / BehaviorsState Status000000000000 1.1.3 Power Inlet SideWarning Label 1.1.4 Top SurfaceXG0224 Hardware Guide Chapter 1 Getting Started1.2.1 SFP Modules 1.2 Options1.2.2 SFP+ Modules 1.2.3 Compact FlashSFP+ Expansion Card LED Display Content1.2.4 Expansion Card LED Display Content CX4 Expansion CardLED Name StateChapter Installation 2.1.1 Installation Requirements 2.1 Requirements for Installation EnvironmentPower Requirements Temperature and Humidity RequirementsCheck List Installation ConditionCheck Item Check Result2.1.2 Space Requirements Ensuring the Space for Installation Maintenance of the SwitchInstallation on 19” Rack 2.2 Installation2.2.1 Installation of the Switch Two ways below are possible for putting on rack mounting brackets Installation of SFP+ Extension Card / CX4 Extension Card 2.2.2 Installation of Extension CardRemoving SFP+ Extension Card / CX4 Extension Card 2.3.2 Cleaning SFP Module / SFP+ Module / Optical Connector 2.3 Connecting the EquipmentCleaning of SFP Module / SFP+ Module 2.3.1 Discharging Twisted Pair CableRemoval of Micro Dust Cleaning of Optical ConnectorTwisted pair cable Connecting Twisted Pair Cableoptical cable Connecting SFP Module Connecting SFP+ Module Do NOT unplug during access. It may result in crashing setting data 2.3.4 Installing Compact Flash CardConnecting CX4 Cable Connect RS232C Cable 2.4 Connecting to a Setup PCNecessary Hardware / Software Power will turn on Turn on the PowerLog on using the terminal software Prepare a Setup PCz Command 2.5 Time SettingSwitch to Configuration mode When setting time zone to be “-0500“z Command 2.6 Set up IP addressIndex Issued on XG0224 Hardware GuideIssued by TA41001-6348