XG0224 Hardware Guide | Chapter 2 Installation |
|
|
2.6Set up IP address
Please set the IP address at times when it is required.
Eg. When setting the switch through www browser or installing a firmware from the initial state of the purchase. The following commands show how to set up the IP address (ex. 192.168.1.1).
zCommand
XG0224# configure
XG0224(config)# lan 0 ip address 192.168.1.1/24 3
XG0224(config)# lan 0 vlan 1
XG0224(config)# commit
XG0224(config)# exit
XG0224#
Precautions
•The IP address is not set at the initial state of the purchase. Please set the IP address through console.
•When logging in by console, you will not be able to log in from the www browser. Please make sure to log off from the console after setting up the IP address.
45 | Set up IP address |