1. OPERATION
| 6.0 nm |
|
| 2.0 |
|
VRM |
|
|
| EBL - - | RNG 2.22nm |
VRM | VRM 2.91nm | BRG 45.62° |
TTG 02H21M | ||
range |
|
|
6.0 nm
Target2.0
Cursor
EBL
Range, bearing |
|
|
|
|
|
|
|
|
and |
|
|
|
|
|
|
|
|
|
|
|
| EBL 45.62° |
|
|
| RNG 2.22nm |
to cursor | EBL |
| VRM - - - |
|
|
| BRG 45.62° | |
location | bearing |
|
|
|
| TTG 02H21M | ||
|
|
|
|
|
| |||
Target
Cursor
Range, bearing and
How to measure the range with the | Measuring range by the EBL and cursor |
VRM and cursor |
|
1.11 Measuring the Bearing
The bearing to a target can be measured with the cursor and the EBL (Electronic Bearing Line).
Measuring bearing with the cursor
Operate the cursor pad to place the cursor on the inside edge of the target. Read the bearing to the target at the bottom right corner.
Measuring bearing with the EBL
1.Press the [MARK] key to show the Mark menu.
MARK MENU
[GAIN] : EBL
[ALARM] : VRM
[MARK] : TLL OUTPUT
Mark menu
2.Press the [GAIN] key to show the EBL, which is a dashed line to distinguish it from the heading line.
3.Operate the cursor pad to bisect the target with the EBL.
4.Check the EBL readout at the bottom left corner on the screen to find the bearing to the target.
To anchor the EBL, press the [MENU/ESC] key. To erase the EBL, press the [GAIN] key twice with the MARK MENU displayed.
1.12 Shifting the Display
Own ship position, or sweep origin, can be displaced manually or automatically to expand the view field without switching to a longer range. The default shift method is manual.
If shift is activated when nav data is displayed, the nav data is automatically erased.
1.Use the cursor pad to place the cursor where you want to shift own ship position.
2.Press the [MODE] key to show the Display Mode menu.
DISPLAY MODE
SHIFT (MANUAL)*
NORMAL
ZOOM
NAV DISP | OFF | ON |
[MENU/ESC] : Exit
Display mode menu
3.Press ▲ to choose SHIFT (MANUAL).
Note: If SHIFT (AUTO) is shown, open the System menu and set SHIFT MODE to MANUAL. For further details, see SHIFT MODE on page 17.
4.Press the [MENU/ESC] key to close the menu.
7
