WARNING

Do not open the equipment unless totally familiar with electrical circuits and service manual.

Only qualified personnel should work inside the equipment.

Wear a hard hat and safety belt when mounting the antenna unit.

Serious injury or death can result if someone falls from the radar antenna mast.

Construct a suitable service platform from which to install the antenna unit.

Serious injury or death can result if someone falls from the radar antenna mast.

Do not install units other than the antenna unit in a place subject to rain or water splash.

Fire, electrical shock or injury can result if water leaks into those units.

Turn off the power at the switchboard before beginning the installation.

Fire, electrical shock or injury can result if the power is on during the installation.

Use only the specified power cables.

Use of power cables that are thinner than those specified can cause fire.

Securely attach protective earth to the ship's body.

The protective earth is required to prevent electrical shock.

CAUTION

A proper license is necessary to install a radar.

See your dealer for details.

Observe the following compass safe distances to prevent interference to a magnetic compass:

 

Standard

Steering

 

compass

compass

 

 

 

Antenna Unit

4.30 m

2.80 m

(60 kw)

 

 

 

 

 

Monitor Unit

1.55 m

1.00 m

(MU-201CR)

 

 

Processor Unit

1.35 m

0.85 m

(RPU-013)

 

 

 

 

 

Control Unit

0.30 m

0.30 m

(RCU-014)

 

 

Control Unit

0.95 m

0.60 m

(RCU-015)

 

 

 

 

 

Control Unit

0.65 m

0.45 m

(RCU-016)

 

 

 

 

 

Power Supply

0.30 m

0.30 m

Unit (PSU-006)

 

 

Memory Card

 

 

Interface Unit

0.90 m

0.60 m

(CU-200)

 

 

Switching Hub

1.00 m

0.60 m

(HUB-100)

 

 

 

 

 

Monitor Unit

1.65 m

1.05 m

(MU-190)

 

 

 

 

 

ii

Page 4
Image 4
Furuno FAR-2167DS-BB, FAR-2167DS-D installation manual Use only the specified power cables