Furuno FAR-2167DS-D, FAR-2167DS-BB Input, Output, Data Specifications Contents Remarks

5. IO DATA

Available input and output data are shown in the tables below and input and output sentences are shown on the next page.

Note: This radar accepts position data fixed by WGS-84 geodetic datum only. Set the datum to WGS-84 on the EPFS (GPS, etc.) connected to this radar. If other type of datum is input, the error message "DATUM" appears and the AIS feature is inoperative.

Input

Data	Specifications	Contents	Remarks
Heading	Synchro or step	GC-10 required	Switching between AD-10
signal			and IEC 61162 is done
			from menu.
	AD-10 format	External AD-100
	IEC 61162-2
Speed signal	IEC 61162-1
Navigator	IEC 61162-1	Position, course, speed, LORAN-
data		C TD, waypoint, route, time, wind
		speed and direction, current data,
		depth, water temperature, roll,
		pitch, ROT
External	Heading, Bearing,	No GAIN, STC control	Operate as remote display
radar signal	Trigger, Video
Alarm ACK	Contact closure		Input signal from alarm
input	signal		system
Track Control	RS-422		Option
unit

Output

Data	Specifications	Contents	Remarks
Radar system	RS-232C	RSD, OSD, TLL	For PC plotter
data
ARPA data	IEC 61162-1	TTM	For ECDIS
Remote display	Heading, Bearing, Tx		2 ports
signal	Trigger, Video
External LCD	DVI	Same as main monitor unit	2 systems max.
monitor signal
External CRT	R, G, B, H, V	Same as main monitor unit	Option
monitor signal
Alarm signal	Contact closure	Output to alarm system by using	4 outputs, output
	signal	photo-relay	content selected from
			menu.

5-1