Furuno FAR-2167DS-BB, FAR-2167DS-D installation manual Type Code No Contents

		Armored LAN cable kit
Type	Code No.		Contents
OP03-28900	000-082-658		Cable FR-FTPC-CY (10 m), Modular connector (2 pcs.)
OP03-28910	000-082-689		Cable FR-FTPC-CY (20 m), Modular connector. (2 pcs.)
OP03-28920	000-082-660		Cable FR-FTPC-CY (30 m), Modular connector (2 pcs.)

Note: When two memory card interface units are connected via a network, change ID code for the second unit.

1.Remove the cover and set the IP0 bit of the DIP switch S1 on the CARDCPU board (03P9333) to ON.

2.Set INIT bit of S1 to ON and turn on the radar. Wait until CR2 starts blinking. DO NOT turn off the power until CR2 starts blinking.

3.Turn off the power and set INIT bit to OFF.

			ON�	OFF
	J314		IP0
			IP1
			IP2
CR2		S1	INIT
	(Default: all OFF)

CARDCPU board 03P9333

Memory card interface unit, showing location of DIP switch S1

4-12