1. OPERATION

1.8Timers

Three timers are provided:

Count-up timer (stopwatch)

Count-down timer (two provided)

Time is displayed in seconds or minutes, depending on counter values.

Once you have set a timer, you can leave that page and select any other display. The counter continues to run in the background.

Count-up timer

The count-up timer functions like a stop watch, counting time upward, to 99 hours, 99 minutes and 59 seconds.

Count-down timers

The two count-down timers count down from a time between 15 minutes and one minute. When these timers have counted down to zero, they then start counting up. The timers beep at preset intervals to alert you to specific points in time.

Two beeps every minute

Three beeps at the start of the last 30 seconds

One beep/second for each of the last 10 seconds

Two-second beep at zero

How to set the timers

1. Press the MODE key to show the desired timer display.

00:00:00.0

DOWN 1

DOWN 2

UP

15.0

15.0

Count-up

Count-down

Count-down

timer

timer 1

timer 2

2.Do one of the following depending on timer type selected:

Count-up timer:

Press the SELECT/CLEAR key to start the timer. A long beep sounds and the timer starts counting upward.

Count-down timer:

To start the timer from the time shown, press the SELECT/CLEAR key. To set a different start time, press the APP/TRUE and SELECT/ CLEAR keys together to enable adjustment. Use the APP/TRUE key to lower the value; SELECT/CLEAR key to raise it. Press the APP/ TRUE and SELECT/CLEAR keys together to confirm setting. Press the SELECT/CLEAR key to start the timer.

11

Page 19
Image 19
Furuno FI-504 manual Timers, Count-up timer, Count-down timers, How to set the timers