3. INSTALLATION
3.4.2Setup2 menu
The setup 2 menu contains user settings which once preset do not re- quire frequent adjustment.
1.Press and hold down the APP/TRUE and SELECT/CLEAR keys together (about
2.Press the DISP key to choose menu item. Each press of the key changes the menu item in the sequence shown below.
*XXxx=program and program ver. nos.
XXxxx* | XXxxx* | KEYBEEP | A | BRILL | ALT |
|
| CAL |
| CAL | CAL |
|
| ON |
| ON | OFF |
Program ver. Program ver. | Key |
| Auto | Alternating | |
no. (CPU1) | no. (CPU2) | beep | brilliance | displays | |
SETUP | rES | SYNCHRO | DEPTH | SPEED | |
CAL | CAL | CAL |
| CAL | CAL |
ON | OFF | ON |
| ON | ON |
Setup 1 menu | Terminal | Synchronization | Depth | Speed | |
| resistor |
| displays | displays | |
TIMER | WIND | HEADING | NAVI | ENVIRO | |
CAL | CAL | CAL |
| CAL | CAL |
ON | ON | ON |
| ON | ON |
Timer | Wind | Heading |
| Nav | Environment |
displays | displays | displays | displays | displays | |
A PILOT | ENGINE | DEMO | RESET |
| |
CAL | CAL | CAL |
| CAL |
|
ON | ON | OFF |
| OFF |
|
Autopilot | Engine | Demo | Restore factory |
| |
displays | displays | mode | defaults |
| |
3.Use the SELECT/CLEAR key to select setting.
4.To continue, press the DISP key to select another item.
5.To save settings and restore normal operation, press the APP/TRUE and SELECT/CLEAR keys together.
26
