Furuno FM-8800D manual Response is received+*. *!#$%

3. DSC OPERATION FOR NON-DISTRESS CASES

3.Rotate the CH knob (or press up / down arrow key) to choose POLLING and press the ENT key.

**Compose Message **

CALL TYPE : POLLING

SHIP ID :

ROUTINE

TCmd1 : POLLING

TCmd2 : NO INFO

4.SHIP ID is selected; press the ENT key.

5.Key in a station ID with the numeric keys and press the ENT key.

6.ROUTINE is selected; press the￿￿￿￿￿￿￿￿ENT￿￿￿key.

7.Rotate the CH knob (or press up / down arrow key) to choose the appropriate communications category and press the ENT key.

8.Press the CALL key more than three seconds to transmit polling call. After the call is transmitted, the following display appears. The timer counts down until

a response is received￿￿+*(￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿. )￿￿￿*￿￿￿￿!"#$%&'

!+!,￿

9-1. When a polling acknowledge call is received, the audio alarm sounds and the display looks something like the one below.

Polling acknowledge received.

FROM : 123456789

ROUTINE

TCmd1 : POLLING

TCmd2 : NO INFO

CANCEL ALARM

If a file is registered, the registration name is displayed.

Press the CANCEL key to silence the alarm. Press the ENT key to show the standby display when you can confirm if called party is within communicating range.

3-26