Furuno FR-1710 manual Do not open the equipment, Do not disassemble or modify the equipment

WARNING

ELECTRICAL SHOCK HAZARD

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Turn off the radar power switch before servicing the scanner unit. Post a warn- ing sign near the switch indicating it should not be turned on while the scanner unit is being serviced.

Prevent the potential risk of being struck by the rotating scanner and exposure to RF radiation hazard.

Wear a safety belt and hard hat when working on the scanner unit.

Serious injury or death can result if someone falls from the radar scanner mast.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Turn off the power immediately if water leaks into the equipment or the equip- ment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock.

Use the proper fuse.

Fuse rating is shown on the equipment. Use of a wrong fuse can result in equipment damage.

Keep heater away from equipment.

Heat can alter equipment shape and melt the power cord, which can cause fire or electrical shock.

Danger/Warning Labels in Display Unit

This radar system contains the danger/ warning labels shown below. Do not remove the labels. If a label is peeling off or is illeg- ible, contact a FURUNO agent for replace- ment.

WARNING

To avoid electrical shock, do not remove cover. No user-serviceable parts inside.

Name : Warning Label

Type : 86-003-1011

Code No. : 100-236-230

DANGER

Electrical shock hazard. Do not touch parts inside this cover.

Name : Danger Label

Type : 14-055-4202

Code No. : 100-245-220

DANGER

Electrical shock hazard. Turn off power before servicing.

Name : Danger Label

Type : 66-022-2012

Code No. : 100-237-730

DANGER

Electrical shock hazard. Do not touch anode cap or its cable.

Name : Danger Label

Type : 14-055-4201

Code No. : 100-243-450

ii