Furuno FR-1710 manual Background Color, Selecting Range Scales, Selecting Bearing Scale Format

1.43 Background Color

The secondary function of the BRILL control (BKGND COLOR) is to select the color of the background, characters, menu, markers and indications, from the five color combinations shown in the table below. Each press of the control selects one of the five color combina- tions.

Table 1-4 Available color combinations

Arrangement	1	2	3	4	5
Radar Display	BLK	BLU	BLU	BLU	BLK
Area
Outside Radar	BLK	BLK	BLK	BLU	BLK
Display Area
Characters	GRN	GRN	GRN	WHT	RED
Menu	YEL	YEL	YEL	YEL	RED
Menu Highlight	YEL	YEL	YEL	YEL	RED
EBL/VRM	L-BLU	GRN	GRN	GRN	L-BLU
Range Rings	GRN	WHT	WHT	WHT	GRN
Cursor	WHT	GRN	GRN	GRN	WHT
Heading Line	GRN	WHT	WHT	WHT	GRN
Target Alarm	WHT	L-BLU	L-BLU	L-BLU	WHT
Zone
North Marker	WHT	L-BLU	L-BLU	L-BLU	WHT
Stern Marker	WHT	L-BLU	L-BLU	L-BLU	WHT

BLK, Black; BLU, Blue; L-BLU, Light-blue; WHT, White; GRN, Green, YEL, Yellow

1.44 Selecting Range Scales

Range scales to use may be selected as fol- lows:

1.Press the [MENU] key.

2.Press the [0] key four times to display the OTHER sub menu.

OTHER

1.↑

2.TEST

3.DEGAUSS

4.TIME ALARM

5.RANGE

6.INSTALL

Figure 1-53 OTHER sub menu

3. Press the [5] key twice to select RANGE.

		RANGE
1.	↑
2.	RANGE		1/8		1/4		1/2
			3/4		1	1.5		2	3
		4		6	8	12		16
		24			32	48		72	96	120

Figure 1-54 RANGE menu

4.Press the [2] key to place the underline under the range scale to select/deselect and then press the [ENTER/SELECT] key. Active ranges are highlighted. Repeat to select/deselect other ranges.

5.Press the [MENU] key.

1.45Selecting Bearing Scale Format

The bearing scale may be displayed in de- grees or compass points or degrees as fol- lows:

1.Press the [MENU] key.

2.Press the [0] key twice to display the OTHER menu.

3.Press the [6] key twice to display the MARK/LINE menu.

	MARK/LINE
1.	↑
2.	INDEX LINES	2	6
3.	STERN MARK	OFF	ON
4.	SHIP’S MARK	OFF	ON
5.	BEARING SCALE	360	COMPASS

Figure 1-55 MARK/LINE menu

4.Press the [5] key to select 360 (degrees) or COMPASS.

5.Press the [ENTER/SELECT] key to reg- ister your selection and the [MENU] key to close the menu.

1-33