Manuals / Furuno / Communications / Telephone

Furuno FS-1570, FS-2570 manual Push the Enter knob to open the TEL NO. menu Compose message

Models: FS-1570 FS-2570

1 222

Download 222 pages 56.97 Kb

Page 107

5 CALLING, RECEIVING

5. Push the [ENTER] knob to open the TEL NO. menu.

Compose message

	CALL TYPE:		PSTN CALL
	COAST ID		: 001234567
	TEL NO.	----------------


	DSC FREQ		:12M-INTL
			GO TO ALL VIEW

6. Enter telephone no. (up to 16 digits) with the numeric keys and then push the [ENTER] knob.

7. Push the [ENTER] knob to open the DSC FREQ menu.

Rotate [ENTER] knob

Compose message

to5scroll.

CALL TYPE

2 MHz

COAST ID

4 MHz

16 MHz

MHz

18 MHz

TEL NO.

68 MHz

22 MHz

OTHER: Special, private channel

12 MHz

25 MHz

OTHER

DSC FREQ

GO TO ALL VIEW

8.Rotate the [ENTER] knob to choose DSC band desired and then push the [ENTER] knob to open the DSC FREQ menu. Rotate the [ENTER] knob to choose DSC frequency desired and then push the [ENTER] knob. The display changes as below.

Compose message

CALL TYPE : PSTN CALL

COAST ID : 001234567

TEL NO. : 1234567890123456

DSC FREQ :

12M-INTL

GO TO ALL VIEW

9.Press the [CALL] key to send the PSTN call (transmission time: about seven seconds). The display shows the following message.

PSTN request call in progress!

TO COAST	: 001234567
TEL NO.	: 1234567890123456

DSC FREQ	:	12577.5 KHZ
TIME TO GO:		7S

10.One of the following three displays appears. (“No response. Try calling again.” Appears after timer counts down to zero and it means there was no response from the coast station.)

5-39

Image 107

Furuno FS-1570, FS-2570 manual Push the Enter knob to open the TEL NO. menu Compose message

Contents

SSB Radiotelephone 00080933802 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents Sending Distress Alert DSC OverviewPreparing TX Calls Nbdp Preparations ViiViii General FeaturesForeword PC Board Program No On Display Remarks Program NumberDSC/watch receiver Nbdp with optional Nbdp Terminal Unit IB-581/IB-583FS-2570 250 W System ConfigurationXii FS-1570 150 WFS-1570/2570 Specifications of SSB RadiotelephoneDSC/WATCH Keeping Receiver Digital Selective Calling IB-581 IB-583Interface Description of controls Power switch Turns the power on/offOperational Overview ControlsFURUNOPanel Dimmer, LCD Contrast Turning the Power On/OffDSC standby screen IndicationsDSC standby screen Radiotelephone screenScanning Routine DSC Frequencies LoudspeakerManual Entry of Position and Time Automatic Acknowledge On/OffAfter last digit Controls become inoperative System CharacteristicsAutomatic setting of working frequency Equipment priorityPower supply units Power Supply Unit optionAC and DC power switches Choosing class of emission SSB RadiotelephoneTransmitting Rotate the Enter knob to set band or channel desired Choosing channel, frequencyChoosing channel Choosing band and band channel with the Enter knobEntering frequency with the numeric keys TuningChoosing frequency Enter frequency by one of the methods belowMonitoring transceiver output power Using the handsetDisplaying IA, IC, VC or RF Reducing transmitter powerMonitoring traffic on intended transmit frequency RF gain sensitivity adjustmentReceiving MeterSquelch frequency Squelch control, squelch frequencyNoise blanker Squelch on/offTelex Communications IntercomReplace the cover Turn on the control unit When Automatic Tuning FailsEntry is selected push the Enter knob User ChannelsRegistering user channels Window shown below appearsChannels may be registered Deleting individual user channels FAX Enable/DisablePress the Cancel key to close the menu Deleting user channelsSpeaker Setting in Off Hook This page intentionally left blank DSC Call What is DSC?Call over Public Switched Telephone Network Pstn DSC OverviewContents of a DSC call Case of Accidental Trans Mission of the Distress Alert Distress alert call and replyIndividual call Audio AlarmsBasic procedure radiotelephone Alarm Frequency intervalDistress receive call Interpreting Call DisplaysReceive calls Received message Individual receive callIndividual send call Send callsDistress send call This page intentionally left blank Russian version Distress OperationsSending Distress Alert Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the time input window Push the Enter knob to open the Input Type menuCompose Communicating by Nbdp Terminal Unit Receiving a Distress AlertAction for ship receiving distress alert on MF band Distress alert received on MF bandCompose message Distress acknowledge call in progress Distress alert received on HF bandSending the distress relay to coast station on HF band Action for ships receiving distress alert on HF bandCompose message Push the Enter knob to open the DSC FREQ. menuDistress relay sel call in progress Category distress transmit sure?Sending distress relay to coast station Sending Distress Relay on Behalf of a Ship in DistressPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Communicate with the coast station Sending distress relay to all shipsShip in distress and time, manually or automatically Push the Enter knob to open the Nature menuDistress relay all call in progress Receiving Distress Relay from Coast Station Receiving Distress Relay All ShipsThis page intentionally left blank Sending an all ships call CALLING, ReceivingAll Ships Call CALLING, Receiving Sending message by Nbdp Terminal Unit Receiving an all ships callSending an individual call Individual CallNBDP-ARQ Routine or ships business priority How to Set Working Frequency, ChannelHow to Set DSC Frequency Press Call key for forced transmission No response! Try calling again? Able acknowledge call receivedUnable acknowledge call received Can send acknowledge Can send Unable Automatically Setting ACQ /SQ keySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Display changes as below Compose message Group CallSending a group call MHZ Priority Routine COM. Type Telephone COM. Freq Receiving message by Nbdp Terminal Unit Receiving a group callSending a geographical area call Geographical Area Call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Sending a neutral craft call Neutral Craft CallSending message by Nbdp Terminal Unit Receiving a neutral craft call Sending a medical transport call Medical Transport CallReceiving a medical transport call Sending a polling call Polling CallCall Type Station ID Polling acknowledge call received Automatic reply Receiving a polling callAfter the call is sent the DSC standby screen appears Manual replySending own ships position to other station Position CallFinding position of other station Position call requesting other ship’s position Pos acknowledge call received Automatic reply Position call other ship requests your positionAcknowledge call received Manual reply Sending a Pstn call, receiving acknowledge back ACK BQ Pstn CallPush the Enter knob to open the TEL NO. menu Compose message Then, one of the following displays appears Waiting for acknowledgementUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S Opening a log file To view the contents of a file, do the followingLog File Erasing Message Files Preparing Individual Calls Preparing TX CallsNBDP-FEC COM. Freq No Info DSC Freq Enter file name and number as shown on the nextHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Editing before sending Sending Prepared CallsSending without modification Printing List of Send Message Files Deleting Send Message FilesSetting Alarms DSC/WATCH Receiver SetupCan send acknowledge Can send Unable manually Manually Auto Ack MenuSample printouts Printing MessagesRoutine frequencies Setting Scan FrequenciesDistress frequencies Local channels International channelsDistress channels Volume setup Adjusting VolumeNbdp terminal unit, printer and keyboard Nbdp System OverviewTurning on the Nbdp System Communication status display Features of the IB-583Description of Equipment Terminal unitKeyboard KeyboardUnderline Function Keys, Menu OperationMenu conventions Inverse videoSelecting menu items and options Menu overviewSelecting menus File menuFunction key description Copy Edit menuUndo CutCall Station Cancel SendingTimer Operation Function key F3 Operate menuDisplays desired calendar month and year. To change Setting with ← or → keyFunction key F4 Window menu Window menuSelect ID Entry Function key F5 Station menuGroup ID Entry TX/RX MSG Save SetupSlave Delay Function key F6 System menuCursor is choosing Window Color Setup press the Enter key Answerback code entry screen Nbdp PreparationsRegistering Answerback Code & ID Codes Registering answerback codeID code screen Station ListRegistering ID codes Message for confirmation of code enteredStation entry screen Registering stationsScanning group list OK/Cancel promptEditing/Deleting stations Timer operation entry screen Timer ProgrammingRegistering timer programs User channel entry screen Editing/Deleting timer programsTo quit, press the Esc key Scan Channel GroupsEditing/Deleting user channels Registering scan channel groupsDeleting channels Editing/Deleting scan channel groupsEditing channels Adding channels10-1 Nbdp File OperationsOpening and Closing Files Creating FilesType your message 10-210-3 Saving a FileFormatting floppy disks Close text screen Saving a file10-4 Cutting text Editing FilesCutting and pasting text 10-510-6 Copying and pasting textSelect all Searching textReplace screen Replacing textGoto line 10-7Opening a file Switching between filesOpening Files Goto top, Goto bottomReal Time Printing Renaming FilesSaving a File Under a New Name Deleting Files10-10 Printing FilesPress the 9 key to choose Set Frequency Nbdp TRANSMITTING, ReceivingManual Calling 11-1Manual calling screen 11-2Press the 1 key to choose Call Station ARQ Mode Operation11-3 Establishing connectionSend file screen 11-4Transmit message by one of the following methods Sending a file stored on a floppy diskStopping transmission FEC Mode OperationChoosing Receive Mode 11-5Communications example Communication Example11-6 Table of abbreviations 11-7Timer operation list Timer OperationEnabling timer operation Command and abbreviation11-9 Stopping timer operationScanning 11-10 Communication BufferPreparing Macrofiles for Automatic Telex Automatic telex overviewRegistering scan groups Preparations11-11 Registering answerback codeCommand Function CommandsCommand Parameter Content Commands processed by Danish coast station Lyngby11-13 Actual procedure for store-and-forward telexStore-and-forward method Close text prompt 11-14Sample macrofile for store-and-forward method Sample Dirtlx macrofile Dirtlx macrofile11-15 Press the Enter key and enter a file name as follows11-16 Procedure for Dirtlx11-17 Automatic Telex using MacrofileBasic procedure Actual procedurePress the ↓ key to choose a macrofile Press the Enter key 11-18Call macro screen 12-1 Maintenance & TroubleshootingDaily Test 12-2 Radiotelephone TestAntenna Coupler Test Check Point Remedy/Remarks MaintenanceMaintenance check points 12-3Unit Fuse Replacement of Fuses12-4 Error message Meaning Remedy Simple TroubleshootingError Messages Problem Probable cause RemedyWR1, WR2 PLL unlock Check if the reference oscillator is 12-612-7 Test Call12-8 Floppy disk drive Nbdp Terminal Unit MaintenanceCleaning the equipment Connectors and earth connectionPress the function key F6 to display the System menu DiagnosticsGeneral diagnostics 12-10Tone test 12-11Tone test Tone test menu12-12 AP-1 AppendixMenu Tree DSC/watch receiverAP-2 RadiotelephoneAP-3 Nbdp terminal unit telexTX kHz RX kHz Remarks File Name Frequency TablesDSC frequency table AP-4AP-5 Custom channels to be programmed by Furuno dealersAP-6 MF band working carrier frequencies ref. US CFR 47 PartAP-7 MF band SSB working carrier frequenciesAP-8 MHz ITU SSB carrier frequencies ITU RR AppendixAP-9 AP-10 12/16 ITU SSB carrier frequencies ITU RR AppendixAP-11 18/19, 22, 25/26 ITU SSB carrier frequencies ITU RR AppendixAP-12 MF band telex frequency tableITU Telex frequency /4 AP-13Frequency /4 AP-14AP-15 ITU Telex Frequency /4 AP-16AP-17 Telex AbbreviationsInput sentences IEC Digital Interface IECO Sentences AP-18ZDA Time and date AP-19GLL Geographic position latitude/longitude RMA Recommended minimum specific LORAN-C data AP-20RMC Recommended minimum specific GPS/TRANSIT data AP-21AP-22 Schematic diagramModel FS-1570/2570 Unit Parts ListAP-23 Control unit FS-1570/2570Model FS-1570T Unit AP-24Transceiver unit FS-1570T Model FS-2570T Unit AP-25Transceiver unit FS-2570T AP-26 Parts LocationTransceiver unit FS-2570T AP-27 Transceiver unit FS-1570TAP-28 Control unit FS-2570CIN-1 IndexIndex IN-2