Manuals / Furuno / Communications / Telephone

Furuno FS-2570, FS-1570 manual Medical Transport Call, Sending a medical transport call

Models: FS-1570 FS-2570

1 222

Download 222 pages 56.97 Kb

Page 94

5 CALLING, RECEIVING

5.6 Medical Transport Call

The medical transport call informs all ships, by urgency priority, that own ship carries medical supplies.

5.6.1 Sending a medical transport call

1. Press the [2/DSC] key and then push the [ENTER] knob to open the CALL TYPE menu.

Compose message

					INDIVIDUAL
					INDIVIDUAL
		CALL TYPE			PSTN CALL
		STATION ID			TEST CALL
		PRIORITY			ALL SHIPS
		COM. TYPE			GROUP CALL
		COM. FREQ			AREA CALL
		DSC FREQ			POSITION6
		GO
		GO



		6
		POLLING
		NEUTRAL
		MEDICAL
Rotate [ENTER]		RELAY ALL
knob to scroll.		RELAY ALL
		RELAY SEL
		DISTRESS

2.Rotate the [ENTER] knob to choose MEDICAL and then push the [ENTER] knob. Note: PRIORITY is automatically selected to URGENCY.

3.Push the [ENTER] knob to open the COM. TYPE menu.

4.Rotate the [ENTER] knob to choose communication type desired (radiotelephone and NBDP-FEC) and then push the [ENTER] knob.

5.Push the [ENTER] knob to open the DSC FREQ menu.

Compose message

CALL TYPE

PRIORITY COM. TYPE

DSC FREQ

2187.5

4207.5

6312.0

8414.5

12577.0

16804.5

KHZ

GO TO ALL VIEW

6.Rotate the [ENTER] knob to choose appropriate frequency and then push the [ENTER] knob. The display changes as below.

Compose message

CALL TYPE	: MEDICAL
		TRANSPORT
PRIORITY	: URGENCY
COM. TYPE	: TELEPHONE

DSC FREQ	:	2187.5 KHZ

	GO TO ALL VIEW

7.Press the [CALL] key to send the call (transmission time: about seven seconds). The display shows “Medical transport call in progress!” while the call is being sent.

5-26

Image 94

Furuno FS-2570, FS-1570 manual Medical Transport Call, Sending a medical transport call

Contents

SSB Radiotelephone 00080933802 Distress Alert Calling Procedure Safety Instructions Iii Table of Contents DSC Overview Sending Distress AlertPreparing TX Calls Vii Nbdp PreparationsViii Foreword FeaturesGeneral Nbdp with optional Nbdp Terminal Unit IB-581/IB-583 Program NumberDSC/watch receiver PC Board Program No On Display RemarksSystem Configuration FS-2570 250 WFS-1570 150 W XiiSpecifications of SSB Radiotelephone FS-1570/2570DSC/WATCH Keeping Receiver Digital Selective Calling IB-583 IB-581Interface ControlsFURUNO Power switch Turns the power on/offOperational Overview Description of controlsTurning the Power On/Off Panel Dimmer, LCD ContrastRadiotelephone screen IndicationsDSC standby screen DSC standby screenLoudspeaker Scanning Routine DSC FrequenciesAutomatic Acknowledge On/Off Manual Entry of Position and TimeAfter last digit Equipment priority System CharacteristicsAutomatic setting of working frequency Controls become inoperativeAC and DC power switches Power Supply Unit optionPower supply units Transmitting SSB RadiotelephoneChoosing class of emission Choosing band and band channel with the Enter knob Choosing channel, frequencyChoosing channel Rotate the Enter knob to set band or channel desiredEnter frequency by one of the methods below TuningChoosing frequency Entering frequency with the numeric keysUsing the handset Monitoring transceiver output powerReducing transmitter power Displaying IA, IC, VC or RFMeter RF gain sensitivity adjustmentReceiving Monitoring traffic on intended transmit frequencySquelch on/off Squelch control, squelch frequencyNoise blanker Squelch frequencyIntercom Telex CommunicationsWhen Automatic Tuning Fails Replace the cover Turn on the control unitWindow shown below appears User ChannelsRegistering user channels Entry is selected push the Enter knobChannels may be registered Deleting user channels FAX Enable/DisablePress the Cancel key to close the menu Deleting individual user channelsSpeaker Setting in Off Hook This page intentionally left blank DSC Overview What is DSC?Call over Public Switched Telephone Network Pstn DSC CallContents of a DSC call Distress alert call and reply Case of Accidental Trans Mission of the Distress AlertAlarm Frequency interval Audio AlarmsBasic procedure radiotelephone Individual callReceive calls Interpreting Call DisplaysDistress receive call Individual receive call Received messageDistress send call Send callsIndividual send call This page intentionally left blank Sending Distress Alert Distress OperationsRussian version Distress Operations Rotate Enter knob to scroll Push the Enter knob to open the Input Type menu Push the Enter knob to open the time input windowCompose Receiving a Distress Alert Communicating by Nbdp Terminal UnitDistress alert received on MF band Action for ship receiving distress alert on MF bandCompose message Distress alert received on HF band Distress acknowledge call in progressAction for ships receiving distress alert on HF band Sending the distress relay to coast station on HF bandPush the Enter knob to open the DSC FREQ. menu Compose messageCategory distress transmit sure? Distress relay sel call in progressSending Distress Relay on Behalf of a Ship in Distress Sending distress relay to coast stationPush the Enter knob to open the Nature menu Compose message ID in Dist No Info Nature Sinking Sending distress relay to all ships Communicate with the coast stationPush the Enter knob to open the Nature menu Ship in distress and time, manually or automaticallyDistress relay all call in progress Receiving Distress Relay All Ships Receiving Distress Relay from Coast StationThis page intentionally left blank All Ships Call CALLING, ReceivingSending an all ships call CALLING, Receiving Receiving an all ships call Sending message by Nbdp Terminal UnitIndividual Call Sending an individual callNBDP-ARQ How to Set Working Frequency, Channel Routine or ships business priorityHow to Set DSC Frequency Press Call key for forced transmission Unable acknowledge call received Able acknowledge call receivedNo response! Try calling again? Setting ACQ /SQ key Can send acknowledge Can send Unable AutomaticallySending automatic acknowledge ACK BQ with comply type Unable Manually acknowledging individual call with Able Call Type Able Acknowledgement Manually acknowledging individual call with Unable Sending a group call Group CallDisplay changes as below Compose message MHZ Priority Routine COM. Type Telephone COM. Freq Receiving a group call Receiving message by Nbdp Terminal UnitGeographical Area Call Sending a geographical area call↓ 10 → Area 34 N 140 W ↓ 10 → Receiving a geographical area call Neutral Craft Call Sending a neutral craft callSending message by Nbdp Terminal Unit Receiving a neutral craft call Medical Transport Call Sending a medical transport callReceiving a medical transport call Polling Call Sending a polling callCall Type Station ID Polling acknowledge call received Receiving a polling call Automatic replyManual reply After the call is sent the DSC standby screen appearsFinding position of other station Position CallSending own ships position to other station Position call requesting other ship’s position Pos acknowledge call received Acknowledge call received Position call other ship requests your positionAutomatic reply Manual reply Pstn Call Sending a Pstn call, receiving acknowledge back ACK BQPush the Enter knob to open the TEL NO. menu Compose message Waiting for acknowledgement Then, one of the following displays appearsUnable acknowledge call received Receiving a Pstn call, sending acknowledge back ACK BQ Shortly thereafter, one of the following messages appears Charge Information Charge Time 00H 12M 34S Log File To view the contents of a file, do the followingOpening a log file Erasing Message Files Preparing TX Calls Preparing Individual CallsEnter file name and number as shown on the next NBDP-FEC COM. Freq No Info DSC FreqHow to Enter File Name and Number Preparing Group Calls Preparing Geographical Area Calls Call Type GROUP6CALL Preparing Pstn Calls Preparing Test Calls Sending without modification Sending Prepared CallsEditing before sending Deleting Send Message Files Printing List of Send Message FilesDSC/WATCH Receiver Setup Setting AlarmsAuto Ack Menu Can send acknowledge Can send Unable manually ManuallyPrinting Messages Sample printoutsDistress frequencies Setting Scan FrequenciesRoutine frequencies Distress channels International channelsLocal channels Adjusting Volume Volume setupTurning on the Nbdp System Nbdp System OverviewNbdp terminal unit, printer and keyboard Terminal unit Features of the IB-583Description of Equipment Communication status displayKeyboard KeyboardInverse video Function Keys, Menu OperationMenu conventions UnderlineFile menu Menu overviewSelecting menus Selecting menu items and optionsFunction key description Cut Edit menuUndo CopyFunction key F3 Operate menu Cancel SendingTimer Operation Call StationWindow menu Setting with ← or → keyFunction key F4 Window menu Displays desired calendar month and year. To changeGroup ID Entry Function key F5 Station menuSelect ID Entry Function key F6 System menu SetupSlave Delay TX/RX MSG SaveCursor is choosing Window Color Setup press the Enter key Registering answerback code Nbdp PreparationsRegistering Answerback Code & ID Codes Answerback code entry screenMessage for confirmation of code entered Station ListRegistering ID codes ID code screenRegistering stations Station entry screenEditing/Deleting stations OK/Cancel promptScanning group list Registering timer programs Timer ProgrammingTimer operation entry screen Editing/Deleting timer programs User channel entry screenRegistering scan channel groups Scan Channel GroupsEditing/Deleting user channels To quit, press the Esc keyAdding channels Editing/Deleting scan channel groupsEditing channels Deleting channelsCreating Files Nbdp File OperationsOpening and Closing Files 10-110-2 Type your messageFormatting floppy disks Saving a File10-3 10-4 Saving a fileClose text screen 10-5 Editing FilesCutting and pasting text Cutting textSearching text Copying and pasting textSelect all 10-610-7 Replacing textGoto line Replace screenGoto top, Goto bottom Switching between filesOpening Files Opening a fileDeleting Files Renaming FilesSaving a File Under a New Name Real Time PrintingPrinting Files 10-1011-1 Nbdp TRANSMITTING, ReceivingManual Calling Press the 9 key to choose Set Frequency11-2 Manual calling screenEstablishing connection ARQ Mode Operation11-3 Press the 1 key to choose Call StationSending a file stored on a floppy disk 11-4Transmit message by one of the following methods Send file screen11-5 FEC Mode OperationChoosing Receive Mode Stopping transmission11-6 Communication ExampleCommunications example 11-7 Table of abbreviationsCommand and abbreviation Timer OperationEnabling timer operation Timer operation listScanning Stopping timer operation11-9 Automatic telex overview Communication BufferPreparing Macrofiles for Automatic Telex 11-10Registering answerback code Preparations11-11 Registering scan groupsCommands processed by Danish coast station Lyngby CommandsCommand Parameter Content Command FunctionStore-and-forward method Actual procedure for store-and-forward telex11-13 Sample macrofile for store-and-forward method 11-14Close text prompt Press the Enter key and enter a file name as follows Dirtlx macrofile11-15 Sample Dirtlx macrofileProcedure for Dirtlx 11-16Actual procedure Automatic Telex using MacrofileBasic procedure 11-17Call macro screen 11-18Press the ↓ key to choose a macrofile Press the Enter key Daily Test Maintenance & Troubleshooting12-1 Antenna Coupler Test Radiotelephone Test12-2 12-3 MaintenanceMaintenance check points Check Point Remedy/Remarks12-4 Replacement of FusesUnit Fuse Problem Probable cause Remedy Simple TroubleshootingError Messages Error message Meaning Remedy12-6 WR1, WR2 PLL unlock Check if the reference oscillator isTest Call 12-712-8 Connectors and earth connection Nbdp Terminal Unit MaintenanceCleaning the equipment Floppy disk drive12-10 DiagnosticsGeneral diagnostics Press the function key F6 to display the System menuTone test menu 12-11Tone test Tone test12-12 DSC/watch receiver AppendixMenu Tree AP-1Radiotelephone AP-2Nbdp terminal unit telex AP-3AP-4 Frequency TablesDSC frequency table TX kHz RX kHz Remarks File NameCustom channels to be programmed by Furuno dealers AP-5MF band working carrier frequencies ref. US CFR 47 Part AP-6MF band SSB working carrier frequencies AP-7MHz ITU SSB carrier frequencies ITU RR Appendix AP-8AP-9 12/16 ITU SSB carrier frequencies ITU RR Appendix AP-1018/19, 22, 25/26 ITU SSB carrier frequencies ITU RR Appendix AP-11MF band telex frequency table AP-12AP-13 ITU Telex frequency /4AP-14 Frequency /4AP-15 AP-16 ITU Telex Frequency /4Telex Abbreviations AP-17AP-18 Digital Interface IECO Sentences Input sentences IECGLL Geographic position latitude/longitude AP-19ZDA Time and date AP-20 RMA Recommended minimum specific LORAN-C dataAP-21 RMC Recommended minimum specific GPS/TRANSIT dataSchematic diagram AP-22Control unit FS-1570/2570 Parts ListAP-23 Model FS-1570/2570 UnitTransceiver unit FS-1570T AP-24Model FS-1570T Unit Transceiver unit FS-2570T AP-25Model FS-2570T Unit Transceiver unit FS-2570T Parts LocationAP-26 Transceiver unit FS-1570T AP-27Control unit FS-2570C AP-28Index IN-1IN-2 Index