Furuno FS-1570, FS-2570 manual Receiving an all ships call, Sending message by Nbdp Terminal Unit

5 CALLING, RECEIVING

Sending message by NBDP Terminal Unit

1.The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.” appears on the NBDP’s display. Press any key on the NBDP Terminal Unit to erase the message.

2.Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the Operate menu.

3.Choose “Call Station” and then press the [Enter] key.

4.“DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.

5.Type and transmit your message.

6.When you have finished sending your message, press the [F10] key to disconnect the line.

5.1.2 Receiving an all ships call

1.When an all ships call is received, the audio alarm sounds and the display looks something like the one shown below.

All ships

call received.

FROM SHIP:	123456789
SAFETY
TELEPHONE	2182.0 KHZ

STOP ALARM

2.Press the [CANCEL] key to silence the alarm. The display shows partial contents of the all ships call as below.

* Received message *

MAR-23-2002-23:59		ECC: OK
ALL SHIPS CALL
FROM SHIP:		123456789
SAFETY
TELEPHONE		2182.0 KHZ
			To view detailed contents,
	GO TO ALL VIEW
			push the [ENTER] knob.

3.Press the [CANCEL] key again to go to the radiotelephone screen. Watch for communications about all ships call on the radiotelephone.

5-3