Furuno FS-1570, FS-2570 manual Able acknowledge call received, Unable acknowledge call received

5 CALLING, RECEIVING

Able acknowledge call received

Communicating by radiotelephone

The audio alarm sounds; press the [CANCEL] key to silence it, and the display changes as below. Press the [CANCEL] key to go to the radiotelephone screen. The working frequency is automatically set; you may start voice communications by radiotelephone.

*	Received message		*
MAR-23-2002-23:59		ECC: OK
ABLE ACKNOWLEDGE
FROM SHIP:		123456789
ROUTINE
TELEPHONE		2138.0 KHZ

GO TO ALL VIEW

Sending message by NBDP Terminal Unit

1.The message “STATION ENTRY COMPLETED FROM DSC. Press any key to escape.” appears on the NBDP’s display. Press any key on the NBDP Terminal Unit to erase the message.

2.Press the function key [F3] on the keyboard of the NBDP Terminal Unit to show the Operate menu.

3.Choose “Call Station” and then press the [Enter] key.

4.“DSC” is selected; press the [Enter] key. “Connect” appears in reverse video.

5.Type and transmit your message.

6.When you have finished sending your message, press the [F10] key to disconnect the line.

Unable acknowledge call received

The alarm sounds; press the [CANCEL] key to silence the alarm. The display looks something like the one below. Send the call again later. If the coast station sends the message “QUEUE INDICATION,” wait until your turn arrives.

*	Received message		*
MAR-23-2002-23:59		ECC: OK
UNABLE ACKOWLEDGE
NO REASON GIVEN
FROM SHIP:		123456789
ROUTINE

GO TO ALL VIEW

Reason for unable to acknowledge:

NO REASON GIVEN

CONGESTION AT SWITCHING CENTRE* BUSY

QUEUE INDICATION*

STATION BARRED*

NO OPERATOR AVAILABLE*

OPERATOR TEMPORARILY UNAVAILABLE* EQUIPMENT DISABLE

MODE NOT USABLE CHANNEL NOT USABLE

* Coast station use

No response! Try calling again?

Re-send call: Push the [ENTER] knob followed by pressing the [CALL] key.

Cancel call: Press the [CANCEL] key to go to radiotelephone screen.

5-9