Furuno FS-2570, FS-1570 11-14, Sample macrofile for store-and-forward method, Close text prompt

11 NBDP TRANSMITTING, RECEIVING

Procedure for preparing a macrofile for store-and-forward method

You will need a macrofile to enable automatic message transmission by store-and-forward method. After preparing it, save it to a floppy disk for future use.

1.Press function key [F1] to display the File menu.

2.Press the [1] key.

3.Prepare macrofile. Below is simple example.

< [1] UNTITLED1 >

@FREE $RRR$

@CALL S:LYNGBY RADIO @WRU

@CASE GA+?

@SEND TLX80212345+

@CASE MSG+?

@SEND B: ABC @SEND KKKK @CASE GA+? @SEND BRK+

1

2

3

4

5

1Search dot pattern free signal until it is found

2Station name (Example: LYNGBY RADIO) Who are you?

Station identity exchange

3Subscriber's Telex number (in example, 802 is country code of Hong Kong) for store-and-forward method

4Location and name of file message B: ABC (IB-581), A: ABC (IB-583)

5Request for termination of message

Sample macrofile for store-and-forward method

4.Press function key [F1] to display the File menu.

5.Press the [3] key. The Close Text appears on the display.

close Text

Save File?

(UNTITLED 1)

Yes

No

Close text prompt

11-14