Furuno FS-2570, FS-1570 manual 11-2, Manual calling screen

11 NBDP TRANSMITTING, RECEIVING

Manual Calling

Mode : ARQ FEC

ID :

Manual calling screen

6.Use the [←] or [→] key to choose appropriate communication mode.

7.Press the [↓ ] key and input party's ID number.

8.Press the [Enter] key to connect the communication line. “Channel Busy Check” appears to inform you that the equipment is checking if the line is busy. If the line is free, “Connect”, “Send” and “Lock” appear in highlight as below. Further, “HT” (High Tension) also appears when the line is connected.

1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break

							2002-09-08 2:14:28 UTC		Caps-Eng
Station	Name	:						HT
Frequency (T/R)		:	8765.00	/ 8965.00(kHz)			Comm Mode :ARQ
Comm Status		:	Connect	Send	Lock	Error
Sending	Volume	:	100(%)	ARQ Error : 0			ARQ Time : 0(sec)

For ARQ mode, go to step 9. For FEC mode, type your message and go to step 13.

9.Press the function key [F7] (WRU). The party's answerback code appears on the screen.

Note: Step 9 and 10 are needed for ship-to-ship calling only.

10.Press the function key [F8] (HR). Your ship's answerback code is sent to the party.

11.Press the [Enter] key and type your message.

12.If you want to receive other party's response, press the function key [F9] (Over).

13.Press the function key [F10] (Break) to disconnect the line.

11-2