Furuno FS-1570, FS-2570 manual 12-11, Tone test menu

12 MAINTENANCE & TROUBLESHOOTING

Tone test

1.Choose Self Test from the System Menu as shown in paragraph 12.8.4.

2.While pressing and holding down the [Shift] key, press the [↓ ] key to show the Tone Test menu.

Tone Test

1:Tone Test 1 (All Char)

2:Tone Test 2 (Fox)

3:Tone Test 3 (Beta)

4:Tone Test 4 (Mark)

5:Tone Test 5 (Space)

6:Tone Test 6 (BY)

Tone test menu

3.Choose a test and press the [Enter] key. You may stop a tone test at anytime by pressing the [Enter] key.

Tone test 1 (All characters)

This test checks for proper transmission of all figures, letters and codes. To conduct the test, call a station in the ARQ or FEC mode. Execute the test, confirming that all characters are transmitted correctly. "Now testing Tone Test 1" appears during the testing. Since the test is conducted continuously, you may press the [Esc] key twice followed by the [F10] key to stop the test and return to the tone test menu.

1:File 2:Edit 3:Operate 4:Window 5:Station 6:System 7:WRU 8:HR 9:Over 10:Break System

Station Name	:	Setup	Lock Change Default
Frequency (T/R)	:	/
Comm Status	:	Connect Send

Now Testing Tone Test 1 (All Char).

ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890-?:().,'=/+abcdefghijklmnopqrstuv wxyz

ABCDEFGHIJKLMNOPQRSTUVWXYZ1234567890-?:().,'=/+abcdefghijklmnopqrstuv wxyz

ABCDEFGHIJKLMNOPQRSTUVWXYZ

Tone test

12-11