![](/images/new-backgrounds/1199170/19917067x1.webp)
4)Press the [▲] or [▼] key to select vacant waypoint number.
5)Press the [NU/CU ENT] key. The editor display appears.
Edit = Waypoint: 010
34° 43.216 'N 135° 21.678'W MARK: _ _
CMNT: PORT
:Cursor
:Column
ENT:Enter :N/S,E/W ESC:Escape
Figure 2-12 Waypoint editor display
6)Enter latitude and longitude. (For South latitude or East longi- tude, press the [TONE] key before entering latitude or longi- tude.)
7)Press [▼] key to select a mark shape and enter a comment as explained in "Entering waypoints by the cursor," or press the [NU/CU ENT] key to enter waypoint and escape.
Entering waypoints by event position
1)Press the [WPT] key.
2)Press the [▼] key to select Event to WPT.
3)Press the [NU/CU ENT] key. The event list appears.
4)Press the [▲] or [▼] key to select event position to enter as a waypoint.
5)Press the [NU/CU ENT] key.
6)Change waypoint number, select waypoint mark and enter com- ment, or press the [NU/CU ENT] key to save waypoint under waypoint number shown, date and standard waypoint mark.
7)Press the [MENU ESC] key twice to escape.
2 – 10