Furuno GP-1600F manual Setting Trial Speed, Route entry screen

ROUTE LIST LEG: - - -.- - - nm

- - - - - -		- - - - - -		- - -
- - - - - -		- - - - - -		- - -
- - - - - -		- - - - - -		- - -
- - -	- - -	- - -	- - -	- - -
- - -	- - -	- - -	- - -	- - -

- - - - - - - - - - - - - - -

WAYPOINT LIST
No	LAT/LONG	COMMENT
001	34° 45.567' N	BUOY
	135° 23.321' E
* 002		ANK
	34° 45.567' N
	135° 23.321' E
005	34° 42.316' N	PORT
	135° 21.678' E
	:Cursor	ENT:Sel

:Skip CLR:Delete ESC:Esc

Figure 2-21 Route entry screen

5)Press the [NU/CU ENT] key to enable entry of waypoints.

6)Press the [▼] or [▲] key to select waypoint number.

7)Press the [NU/CU ENT] key. The waypoint number selected appears and the cursor shifts to next column.

8)Repeat steps 6 and 7 to complete the route.

9)When the route is completed, press the [MENU ESC] key three times to escape.

2.12Setting Trial Speed

The TTG between legs on the route is calculated based on the trial speed, which is entered in the route/route list. The default speed is

10 knots. To enter a different speed, do the following:

1)Press the [MENU ESC] key.

2)Press the [4] key to select ROUTE/ROUTE LIST. The route/ route list appears.

3)Place the cursor on waypoint 01 and press the [▲] key, or place the cursor on waypoint 20 and press the [▼ ] key.

4)Press ten keys to set the trial speed.

5)Press the [▼] or [▲] key to escape.

6)Press the [NU/CU ENT] key.

7)Press the [MENU ESC] key twice to escape.

2 – 17