Furuno GP-1600F manual Memory Card Operations for technicians, Saving data, Loading data

6.7 Memory Card Operations (for technicians)

Before changing the internal battery, save the contents of the memory (waypoint, event, mark, track, route data and menu set- ting data) to a memory card (256 K bytes).

Saving data

1)Press the [MENU ESC] key.

2)Press the [7] key to select MEMORY SAVE/LOAD.

3)Press the [▲] key to select SAVE MEMORY.

MEMORY SAVE/LOAD

SAVE MEMORY NO YES

LOAD MEMORY NO YES

▼▲ : Cursor : Go ESC: Esc

Figure 6-7 MEMORY SAVE/LOAD menu

4)Press the [s] key. The message window appears.

5)Press the [NU/CU ENT] key. The card is formatted and data are saved. When saving is completed, the cursor moves to NO at the SAVE MEMORY line.

6)Press the [MENU ESC] to escape.

Note: "Memory card err" appears in the folllowing cases:

•No card is set

•Card is write-protected

•Card error

Loading data

Data stored on a memory card can be loaded as follows:

1)Press the [MENU ESC] key.

2)Press the [7] key to select MEMORY SAVE/LOAD.

3)Press the [▼] key to select LOAD MEMORY.

4)Press the [s] key to select YES. The message window ap- pears.

5)Press the [NU/CU ENT] key. After the plotter data is loaded, the system is reset and the initial display appears.

6 – 8