![](/images/new-backgrounds/1199170/19917087x1.webp)
5)Operate the [Arrow] keys to select route waypoint which you want to erase.
6)Press the [CLR] key.
7)Press the [MENU ESC] key several times to escape.
Note: To erase entire route, erase all waypoints.
2.17 Entering Marks
You can inscribe marks on the display to denote important loca- tions; for example, buoy, fishing point, wreck. Further, marks can be connected with lines to depict important areas such as a hot fishing spot or danger area.
Enabling entry of marks
The [EVENT MOB] key enters marks. When the key is pressed a mark, an event mark or MOB mark appears on the display depend- ing on menu setting.
To enable entry of marks on the display, do the following:
1)Press the [MENU ESC] key.
2)Press the [0] key to select SYSTEM MENU.
3)Press the [2] key to select PLTR SETUP.
PLTR SETUP |
|
|
|
|
|
| |
NAVAID |
|
| OWN |
| LC DC ALL | ||
SCALE |
|
|
|
| RANGE | ||
SCALE | |||||||
SMOOTHING | 00 (00~15) |
| |||||
SPD AVERAG |
| 00 min |
|
| |||
BEARING |
| TRUE | MAG |
| |||
|
|
|
| ||||
MAG CALIB |
| AUTO |
| MAN |
06.9° W 00.0° E
EVNT METHOD EVENT MARK
POSITION |
|
| L/L | LOP | |
|
|
|
| ||
DISP |
| LC |
| DC | |
Chain:Sec | |||||
LOP CALIB |
| +000.0∝ s | |||
| +000.0∝ s | ||||
|
|
| :E/W | ||
▼▲ :Cursor |
| ESC:Esc |
Figure 2-23 PLTR SETUP menu
4)Press the [▼] or [▲] key to select EVNT METHOD.
5)Press the [s] key to select MARK.
6)Press the [MENU ESC] key.
2 – 20