Entering routes by cursor
1)Press the [GOTO] key.
The destination waypoint menu appears.
SELECT GOTO MODE
▲WPT List EVENT List ROUTE List
▼Cursor/Route Plan CLR: Release
ENT:Sel ESC:Cancel
Figure 2-18 Display for selection of destination
2)Press the [▼] key to select Curosr/Route Plan.
3)Press the [NU/CU ENT] key.
4)Operate the [Arrow] keys to place the cursor on location for destination waypoint.
5)Press the [NU/CU ENT] key. To clear entry, press the [CLR] key.
6)Repeat steps 4 and 5 to complete the route.
Note: Any route waypoints you enter here will also be entered on the waypoint list.
7)Press the [NU/CU ENT] key.
8)Select route number.
If you do not want to store the route permanently, press the [MENU ESC] key to escape.
9)Press the [NU/CU ENT] key.
A dashed line connects all waypoints including own ship’s posi- tion. The range and bearing to the first waypoint appear at the bot- tom of the display.
2 – 15
