2.8 Changing Waypoint Data
You may change the latitude and longitude position and comments of waypoints you have entered, through the waypoint list.
1)Press the [WPT] key.
The menu for selection of waypoint entry method appears.
2)Press the [▲] key to select WPT List.
3)Press the [NU/CU ENT] key. The waypoint list appears.
4)Operate the [▲] or [▼] key to select waypoint number to change.
5)Press the [NU/CU ENT] key. The confirmation window ap- pears.
OVER WRITE
ENT:YES
ESC:NO
Figure 2-13 Window for over writing waypoint data
6)Press the [NU/CU ENT] key. The Editor display appears.
7)Press the [NU/CU ENT] key. To change position, operate the [t] or [s] key to select digit in position to change and press appropriate numeric key.
8)Press the [▼] key to go to the MARK line. Select mark and press the [NU/CU ENT] key.
9)The comment entry display appears. Change the comment by selecting appropriate characters, selecting ENTER and press- ing the [NU/CU ENT] key, or press the [NU/CU ENT] key to keep the original comment.
2 – 11
