Dell UCS-51 manual Configuration Utility Error Messages

Configuration Utility Error Messages

NOTE: These error messages are displayed inside the Configuration Utility. Restart your system and retry if you encounter any of these.

Table 6-3. Configuration Utility Error Messages

Message	Meaning and Suggested Solution
An error occurred while reading	An error reading any one of a number of settings from the
non-volatile settings.	firmware. Reseat the controller and reboot.
An error occurred while reading	Controller setup and initialization has failed. Reboot the
current controller settings.	system.
Advanced Device Properties settings	Failed to read vital configuration page from firmware. Reflash
not found.	the firmware and reboot.
Advanced Adapter Properties settings	Failed to read vital configuration page from firmware.Reflash
not found.	the firmware and reboot.
Error obtaining PHY properties	Failed to read vital configuration page from firmware.Reflash
configuration information.	the firmware and reboot.
Configuration Utility Options Image	Failed to properly read Configuration Utility options from
checksum error.	flash. Restart and retry. If the issue persists, reflash the
	firmware on the controller.
Configuration Utility Options Image	Failed to properly read Configuration Utility options from
error.	flash. Restart and retry. If the issue persists, reflash the
	firmware on the controller.
Configuration Utility Options Image	Failed to properly read Configuration Utility options from
not found.	flash. Restart and retry. If the issue persists, reflash the
	firmware on the controller.
Can't load default Configuration	Failed to allocate memory for Configuration Utility options
Utility options.	structure.
An error occurred while writing	An error occurred while writing one or more settings to the
non-volatile settings.	firmware.

Troubleshooting

37