Hardware Installation 17
Figure 3-2. Connecting the Cable
9
Replace the cover of the system. See your system’s
Hardware Owner’s Manual
or the
User’s Guide
for
more information on closing the system.
10
Reconnect the power cable(s) and network cables, and then turn on the system.
NOTE: Ensure that you do not connect a hard disk and tape drive to the same SAS 5/iR Adapter.
NOTE: For information on connecting your SAS 5i/R controller to a tape drive see your system’s Hardware
Owner’sManual.
1SAS 5/iR Adapter 2SAS x4 internal connector 3cable
3
1
2
YD912bk1.book Page 17 Monday, April 2, 2007 4:39 PM