Furuno GP-1600F manual Changing Mark Attributes, Entering marks, Changing mark size

Entering marks

To enter a mark at ship's position;

1)Press the [CURS] key to turn off the cursor.

2)Press the [EVENT MOB] key. A mark is placed at ship's posi- tion.

To enter a mark at cursor location;

1)Press the [CURS] key to turn on the cursor.

2)Press the [EVENT MOB] key. A mark is placed at cursor loca- tion.

The mark currently selected on the TRACK/MARK SETUP menu appears at the cursor location (or current ship's position).

2.18 Changing Mark Attributes

Changing mark size

You may change the size of marks to small or large.

1)Press the [MENU ESC] key. The main menu appears.

2)Press the [2] key to select TRACK/MARK SETUP.

TRACK/MARK	SETUP
EVENT SHAPE
MARK SHAPE
LINE TYPE
MARK	BRT	DIM
MARK SIZE		S
PLOT	ON	OFF
PLOT INTVL	TIME	DIST AUTO
	00° 10	00.10nm
:Cursor	ESC:Esc

Figure 2-24 TRACK/MARK SETUP menu

3)Press the [▼] or [▲] keys to select MARK SIZE.

4)Press the [t] or [s] key to select L or S.

5)Press the [MENU ESC] key.

2 – 21