Furuno SC-60 manual Safety Instructions

SAFETY INSTRUCTIONS

Safety Instructions for the Operator

WARNING

Do not open the equipment.

Only qualified personnel should work inside the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Do not place liquid-filled containers on the top of the processor unit.

Fire or electrical shock may result if the liquid enters the equipment.

CAUTION

No one navigation device should ever be solely replied upon for the navigation of a vessel.

Always confirm position against all avail- able aids to navigation, for safety of vessel and crew.

Use the proper fuse.

Use of a wrong fuse can result in damage to the equipment.

Safety Instructions for the Installer

WARNING

Do not open the cover unless totally familiar with electrical circuits and service manual.

Improper handling can result in electrical shock.

Turn off the power at the switchboard before beginning the installation.

Fire or electrical shock can result if the power is left on.

Do not install the equipment where it may get wet from rain or water splash.

Water in the equipment can cause fire, electrical shock or damage to the equipment.

NOTICE

Observe the following compass safe distances to prevent interference to a magnetic compass:

	Standard	Steering
	Compass	Compass
Display unit	0.5 m	0.3 m
SC-602
Processor unit	1.3 m	0.8 m
SC-601/601D
Antenna unit	0.3 m	0.3 m
SC-303
Antenna unit	0.3 m	0.3 m
SC-603
DGPS beacon	0.3 m	0.3 m
antenna GR-8

i