APPENDIX B

7.Make a loop in the antenna cable as shown in the illustration below. Fasten the antenna cable to the antenna mast with cable ties.

Coat with Three

Bond 1211 (supplied).

Coat bolt threads with Three Bond and then coat nuts with the Three Bond.

Fix antenna cable to mast with cable ties.

Fastening the antenna cable

8.Coat bolt threads and nuts at the bottom of each antenna element with Three Bond 1211.

9.Paint pedestal and support plate with anti-corrosive paint.

10.If necessary, attach the “bird-repellent fixtures” (supplied) to each antenna element and the Antenna Cover S as shown below.

Bird-repellent fixture

Antenna element

B-5

Page 83
Image 83
Furuno SC-60 manual Fastening the antenna cable, Antenna element